Home / Syllabus / KTU / KTU B.Tech Model Question paper for Basics of Mechanical Engineering

# KTU B.Tech Model Question paper for Basics of Mechanical Engineering

### KTU B.Tech Model Question paper for Basics of Mechanical Engineering

Reg. No:_____________                                                    Name:___________________

SECOND SEMESTER B.TECH DEGREE EXAMINATION, MODEL QUESTION

Course Code: ME100

Course Name: BASICS OF MECHANICAL ENGINEERING

Max. Marks: 100                                                                                         Duration: 3 Hours

Part A

Answer all questions. Each question carries 3 Marks.

1. Sketch the p-v and t-s diagram of the Otto cycle and name the different processes. Write down the expression for the efficiency of the cycle.
2. Sketch a typical ignition system of petrol engine and name the different components.
3. Write short note on CFC free refrigerants.
4. Compare between belt drive and gear drive.
5. Differentiate between welding and forging.
6. What are the advantages of casting over manufacturing processes?
7. What are the elements of CNC machines?
8. Write a short note on grinding process.

KTU B.Tech Model Question paper for Basics of Mechanical Engineering

###### This Question from ktubtechquestions.com

Part B

Answer any 8 questions(Two from each Module). Each question carries 6 Marks

MODULE I

1. Derive an expression for the  air standard efficiency of a diesel cycle.
2. State First law of Thermodynamics and show that energy is a property of the system.
3. An IC engine working on Otto cycle takes the air in a 0.97 bar and 35o The compression ratio is 7. The heat supplied during the cycle is 1.5 MJ/kg
4. i) The air standard efficiency
5. ii) The maximum temperature attained and

iii) The work done per kg of the working fluid.

MODULE II

1. With the help of a neat sketches explain the working of four stroke diesel engine.
2. With neat diagram explain open and closed gas turbine cycles.
3. Describe the working of centrifugal pump with a neat sketch.

MODULE III

1. Explain the working of window type air conditioning unit.
2. With the help of flow and p-h diagram explain the working of a vapour compression refrigeration system?
3. Explain the desirable properties of refrigerants.

MODULE IV

1. Explain the working of MPFI system in vehicles.
2. With a neat sketch explain the working of a single plate clutch.
3. What are the advantages and disadvantages of rope drive as a power transmission method?
###### This Question from ktubtechquestions.com

PART C

Answer any 4 questions (Two from each Module). Each question carries 7 marks.

MODULE V

1. Write a note on rolling process.
2. Describe the different forging operations.
3. Explain, with neat sketch, the die casting process.

MODULE VI

1. Describe the following machine operations:

(i) Drilling (ii) Grinding

1. Differentiate between up milling and down milling.
2. Write a note on rolling process.

x

## KTU B.Tech S5 Syllabus Automobile Engineering

KTU B.Tech S5 Syllabus Automobile Engineering   ME307 Machine Design-I ME309 Metallurgy ...

## KTU B.Tech S5 Syllabus Electrical & Electronics Engineering

KTU B.Tech S5 Syllabus Electrical & Electronics Engineering         ...